Supremo Diamond Rigid Core Emerald With Built In Underlay 8mm

Product Code
VL068
Click System
I4F
Colour
Grey
Width
181mm
Length
1220mm
Thickness
8.0mm
Room
Basement, Bathroom, Conservatory, Dining Room, Kitchen, Lounge, Hallway, Bedroom
Wear Layer
0.7mm
Core
SPC Rigid Core
Pre-applied underlay
Yes
Brand
Supremo Diamond
Style
Plank, Wood Effect
Smoked Flooring Style If you are looking a smoked flooring it is important to note that due to the smoking process the colour variation is greater.
Suitability
Commercial & Residential, Water Underfloor Heating
Warranty
25 Years Residential, 5 Years Commercial
Coverage
1.32 m²

If you’re looking for a light, neutral floor that’s hardwearing but still great to look at, this one’s for you. This Supremo Diamond Rigid Core Emerald luxury vinyl flooring is an option that you can fit in pretty much any room in the home or throughout your home if you fancy. And it’s one that you won’t tire of.

Light without being showy, this floor has lots of wood like detail and will blend in perfectly with ultra-modern as well as traditional interior décor choices. The perfect backdrop to neutral colours or a riot of bolds, you can’t go wrong when you choose this floor.

Discover Supremo Diamond Emerald, a quality luxury Vinyl flooring with a grey stylish look. It has been manufactured using highest quality recycled polymers. The grain and overall look of the plank is designed to replicate the look of natural wood. Our Supremo Diamond Emerald measures 8mm thick, with 0.7mm wear layer, 181mm wide and 1220mm long.

The edges of the planks are micro bevelled, which contributes to the authentic look of natural wood these floorboards possess, while the fitting method is click system.

We strongly recommend to order a sample and not rely only on the photos on the web.

Due to the nature of the products, description and images should only be used for guidance.

We recommend fitting this product with our specific Underlay Supremo Vinyl 1.5mm


Unless the product has pre applied underlay already, in this case do not use any type of underlay but the pre applied underlay.


It needs to be installed on top of a 100% straight, rigid and even subfloor (We highly recommend to use self leveling compound to reach high enough degree of evenness).

When installing on top of screed the screed moisture must not exceed 2%.


Installation Highlight If the sub floor is made of wood floor boards a minimum 18mm plywood should be applied and secured before fitting the LVT

We strongly recommend that Vinyl flooring tiles must be installed only on dry screed subfloor and only by a professional fitter


Installing this product on top of an uneven subfloor or unsuitable underlay will cause the click system to fail and the floor to get damaged over time.

You have to create an expansion gap or barrier every 30m2 when fitting LVT.