Supremo Rigid Core Natural Classic With Built In Underlay 6.5mm

Product Code
VL047
Click System
I4F
Colour
Natural
Width
181mm
Length
1220mm
Thickness
6.5mm
Room
Basement, Bathroom, Conservatory, Dining Room, Kitchen, Lounge, Hallway, Bedroom
Wear Layer
0.7mm
Core
SPC Rigid Core
Pre-applied underlay
Yes
Brand
Supremo
Style
Plank, Wood Effect
Smoked Flooring Style If you are looking a smoked flooring it is important to note that due to the smoking process the colour variation is greater.
Suitability
Commercial & Residential, Water Underfloor Heating
Warranty
25 Years Residential, 5 Years Commercial
Coverage
1.77 m²

Are you on the lookout for a wood-look floor but don’t actually want wood? If so, take a minute to check out this Supremo rigid core Natural Classic solution. As you can see from the image, this floor looks incredibly like real wood but has all the versatility and ease of maintenance that you can expect from a top-quality vinyl.

Irrespective of where you choose to lay this floor, you’ll get a super blank canvas for planning the rest of your interior. Whether you go all out designer, cutting edge modern or more traditional, this floor will just take it in its stride.

Discover Supremo Classic, a quality luxury vinyl flooring with a natural stylish look. It has been manufactured using the highest quality recycled polymers. The grain and overall look of the plank are designed to replicate the look of natural wood. The edges of the planks are micro bevelled, which contributes to the authentic look of natural wood these floorboards possess, while the fitting method is click system.

We strongly recommend to order a sample and not rely only on the photos on the web.

Due to the nature of the products, description and images should only be used for guidance.

We recommend fitting this product with our specific Underlay Supremo Vinyl 1.5mm


Unless the product has pre applied underlay already, in this case do not use any type of underlay but the pre applied underlay.


It needs to be installed on top of a 100% straight, rigid and even subfloor (We highly recommend to use self leveling compound to reach high enough degree of evenness).

When installing on top of screed the screed moisture must not exceed 2%.


Installation Highlight If the sub floor is made of wood floor boards a minimum 18mm plywood should be applied and secured before fitting the LVT

We strongly recommend that Vinyl flooring tiles must be installed only on dry screed subfloor and only by a professional fitter


Installing this product on top of an uneven subfloor or unsuitable underlay will cause the click system to fail and the floor to get damaged over time.

You have to create an expansion gap or barrier every 30m2 when fitting LVT.