Supremo Royal Rigid Core White Pearl With Built In Underlay 6mm

Product Code
VL069
Click System
I4F
Colour
White
Width
228mm
Length
1.20m
Thickness
6.0mm
Room
Basement, Bathroom, Conservatory, Dining Room, Kitchen, Lounge, Hallway, Bedroom
Wear Layer
0.5mm
Core
SPC Rigid Core
Pre-applied underlay
Yes
Brand
Supremo Royal
Style
Plank, Wood Effect
Smoked Flooring Style If you are looking a smoked flooring it is important to note that due to the smoking process the colour variation is greater.
Suitability
Commercial & Residential, Water Underfloor Heating
Warranty
20 Years Residential, 3 Years Light Commercial Use
Coverage
1.95 m²

If you’re on the lookout for a floor that’s light and bright. A floor that will add a notion of space and luminosity to your room, check this out. This supremo royal rigid core white pearl flooring adds a feeling of volume and light to even the smallest, gloomiest of rooms without being too light or impractical.

This floor is light but has a clever grain pattern which means that you’re not constantly worrying if you need to brush or mop it. It also is nicely neutral which means it can blend into the background but still raise your room to a whole new level.

Discover Supremo Royal White Pearl, a quality luxury Vinyl flooring with a white stylish look. It has been manufactured using highest quality recycled polymers. The grain and overall look of the plank is designed to replicate the look of natural wood.

The edges of the planks are micro bevelled, which contributes to the authentic look of natural wood these floorboards possess, while the fitting method is click system.

We strongly recommend to order a sample and not rely only on the photos on the web.

Due to the nature of the products, description and images should only be used for guidance.

We recommend fitting this product with our specific Underlay Supremo Vinyl 1.5mm


Unless the product has pre applied underlay already, in this case do not use any type of underlay but the pre applied underlay.


It needs to be installed on top of a 100% straight, rigid and even subfloor (We highly recommend to use self leveling compound to reach high enough degree of evenness).

When installing on top of screed the screed moisture must not exceed 2%.


Installation Highlight If the sub floor is made of wood floor boards a minimum 18mm plywood should be applied and secured before fitting the LVT

We strongly recommend that Vinyl flooring tiles must be installed only on dry screed subfloor and only by a professional fitter


Installing this product on top of an uneven subfloor or unsuitable underlay will cause the click system to fail and the floor to get damaged over time.

You have to create an expansion gap or barrier every 30m2 when fitting LVT.