0203 8690 899
Toggle Nav
Search
Advanced Search
My Cart itemsitem

Supremo Diamond Rigid Core Emerald With Built In Underlay 8mm

£23.91 /m² £51.27 /m²
Supremo Diamond Rigid Core Emerald With Built In Underlay 8mm VL077 0
Supremo Diamond Rigid Core Emerald With Built In Underlay 8mm VL077 0 Supremo Diamond Rigid Core Emerald With Built In Underlay 8mm VL077 2 Supremo Diamond Rigid Core Emerald With Built In Underlay 8mm VL077 4 Supremo Diamond Rigid Core Emerald With Built In Underlay 8mm VL077 5 Supremo Diamond Rigid Core Emerald With Built In Underlay 8mm VL077 6 Supremo Diamond Rigid Core Emerald With Built In Underlay 8mm VL077 7 Supremo Diamond Rigid Core Emerald With Built In Underlay 8mm VL077 8
Product Code
VL077
Click System
I4F
Colour
Grey
Width
178mm
Length
1220mm
Thickness
8.0mm
Room
Basement, Bathroom, Conservatory, Dining Room, Kitchen, Lounge, Hallway, Bedroom
Wear Layer
0.7mm
Core
SPC Rigid Core
Pre-applied underlay
Yes
Brand
Supremo Diamond
Style
Plank, Wood Effect
Smoked Flooring Style If you are looking a smoked flooring it is important to note that due to the smoking process the colour variation is greater.
Suitability
Commercial & Residential, Water Underfloor Heating
Warranty
25 Years Residential, 5 Years Commercial
Coverage
1.30 m²

Are you looking for a light, neutral floor with a woody look? Yes? Then check out this supremo diamond rigid core floor called Emerald. It’s incredibly light and neutral and looks convincingly like wood but at the same time has all the convenience of vinyl.

When you choose this floor, you can be sure it’ll wash even the gloomiest of rooms with light and give an illusion of space - in even the smallest of rooms. Choose to mix it with pastel colours, whites and off whites or go dramatically dark – it’s entirely up to you – this floor will take it all in its stride.

Discover Supremo Diamond Emerald, a quality luxury Vinyl flooring with a

The edges of the planks are micro bevelled, which contributes to the authentic look of natural wood these floorboards possess, while the fitting method is click system.

We strongly recommend to order a sample and not rely only on the photos on the web.

Due to the nature of the products, description and images should only be used for guidance.

We recommend fitting this product with our specific Underlay Supremo Vinyl 1.5mm


Unless the product has pre applied underlay already, in this case do not use any type of underlay but the pre applied underlay.


It needs to be installed on top of a 100% straight, rigid and even subfloor (We highly recommend to use self leveling compound to reach high enough degree of evenness).

When installing on top of screed the screed moisture must not exceed 2%.


Installation Highlight If the sub floor is made of wood floor boards a minimum 18mm plywood should be applied and secured before fitting the LVT

We strongly recommend that Vinyl flooring tiles must be installed only on dry screed subfloor and only by a professional fitter


Installing this product on top of an uneven subfloor or unsuitable underlay will cause the click system to fail and the floor to get damaged over time.

You have to create an expansion gap or barrier every 30m2 when fitting LVT.


LVT Maintenance Guide 803.4 KB
Plank Installation Guide for LVT with I4F System 210.7 KB