Supremo Rigid Core Herringbone Natural Hillside With Built In Underlay 6mm

£20.45 /m² £40.40 /m²
Product Code
VL070
Click System
I4F
Colour
Brown
Width
127mm
Length
610mm
Thickness
6.0mm
Room
Basement, Bathroom, Dining Room, Kitchen, Lounge
Wear Layer
0.5mm
Core
SPC Rigid Core
Pre-applied underlay
Yes
Brand
Supremo
Style
Herringbone, Wood Effect
Smoked Flooring Style If you are looking a smoked flooring it is important to note that due to the smoking process the colour variation is greater.
Suitability
Commercial & Residential, Water Underfloor Heating
Warranty
20 Years Residential, 3 Years Light Commercial Use
Coverage
1.86 m²

Are you looking for a floor that has the look of reclaimed wood, yet is affordable and easy to look after? If so, this one’s for you. This supremo rigid core herringbone flooring in Natural is as affordable as it is stylish. A really authentic reclaimed wood look with all the convenience of vinyl, this one really is a winner.

When you choose this floor, you can mix it with cutting edge modern furnishings and décor or go more traditional – it’s entirely up to you. Whatever you put with this floor, however often you change your interior style, you can be confident that it’ll look great.

Discover Supremo Herringbone Natural Hillside, a quality luxury vinyl flooring with a brown stylish look. It has been manufactured using the highest quality recycled polymers. The grain and overall look of the plank are designed to replicate the look of natural wood. The edges of the planks are micro bevelled, which contributes to the authentic look of natural wood these floorboards possess, while the fitting method is click system.

We strongly recommend to order a sample and not rely only on the photos on the web.

Due to the nature of the products, description and images should only be used for guidance.

We recommend fitting this product with our specific Underlay Supremo Vinyl 1.5mm


Unless the product has pre applied underlay already, in this case do not use any type of underlay but the pre applied underlay.


It needs to be installed on top of a 100% straight, rigid and even subfloor (We highly recommend to use self leveling compound to reach high enough degree of evenness).

When installing on top of screed the screed moisture must not exceed 2%.


Installation Highlight If the sub floor is made of wood floor boards a minimum 18mm plywood should be applied and secured before fitting the LVT

We strongly recommend that Vinyl flooring tiles must be installed only on dry screed subfloor and only by a professional fitter


Installing this product on top of an uneven subfloor or unsuitable underlay will cause the click system to fail and the floor to get damaged over time.

You have to create an expansion gap or barrier every 30m2 when fitting LVT.