Supremo Rigid Core Herringbone Sand Silic With Built In Underlay 6mm

£20.47 /m² £38.38 /m²
Product Code
VL063
Click System
I4F
Colour
Natural
Width
127mm
Length
610mm
Thickness
6.0mm
Room
Basement, Bathroom, Dining Room, Kitchen, Lounge
Wear Layer
0.7mm
Core
SPC Rigid Core
Pre-applied underlay
Yes
Brand
Supremo
Style
Herringbone, Wood Effect
Smoked Flooring Style If you are looking a smoked flooring it is important to note that due to the smoking process the colour variation is greater.
Suitability
Commercial & Residential, Water Underfloor Heating
Warranty
25 Years Residential, 5 Years Commercial
Coverage
1.86 m²

This Silic supremo rigid core herringbone luxury vinyl floor is for you if you’re on the lookout for something a bit out of the ordinary, but not so much so that you’ll tire of it in a short time. This floor has all the style, colour and charm of traditional oak flooring but all the convenience of a modern-day luxury vinyl.

When you choose this floor, you can fit it pretty much in any room in the home and sit back and relax. Not only is it hard-wearing, it’s an absolute breeze to look after AND looks fabulous to boot. What more could you ask for?

Discover Supremo Sand Silic, a quality luxury Vinyl flooring with a natural stylish look. It has been manufactured using highest quality recycled polymers. The grain and overall look of the plank is designed to replicate the look of natural wood.

The edges of the planks are micro bevelled, which contributes to the authentic look of natural wood these floorboards possess, while the fitting method is click system.

We strongly recommend to order a sample and not rely only on the photos on the web.

Due to the nature of the products, description and images should only be used for guidance.

We recommend fitting this product with our specific Underlay Supremo Vinyl 1.5mm


Unless the product has pre applied underlay already, in this case do not use any type of underlay but the pre applied underlay.


It needs to be installed on top of a 100% straight, rigid and even subfloor (We highly recommend to use self leveling compound to reach high enough degree of evenness).

When installing on top of screed the screed moisture must not exceed 2%.


Installation Highlight If the sub floor is made of wood floor boards a minimum 18mm plywood should be applied and secured before fitting the LVT

We strongly recommend that Vinyl flooring tiles must be installed only on dry screed subfloor and only by a professional fitter


Installing this product on top of an uneven subfloor or unsuitable underlay will cause the click system to fail and the floor to get damaged over time.

You have to create an expansion gap or barrier every 30m2 when fitting LVT.