Supremo Royal Rigid Core Sand Silic With Built In Underlay 6mm

£22.04 /m² £38.75 /m²
Product Code
Click System
Basement, Bathroom, Conservatory, Dining Room, Kitchen, Lounge, Hallway, Bedroom
Wear Layer
SPC Rigid Core
Pre-applied underlay
Supremo Royal
Plank, Wood Effect
Smoked Flooring Style If you are looking a smoked flooring it is important to note that due to the smoking process the colour variation is greater.
Commercial & Residential, Water Underfloor Heating
25 Years Residential, 5 Years Commercial
1.95 m²

If you want reminding of warm, sunny beaches every time you go into your room, then this Supremo Royal Rigid Core Sand Silic luxury vinyl flooring is for you. Reminiscent of far-flung beaches basking in warm sunshine, this floor won’t disappoint. It’s as hardwearing as it is good looking, and when it comes to versatility, it’s second to none.

No matter how often you change your mind or your interior, this floor will work with you. Equally impressive as a backdrop to dark, dramatic décor, it works superbly with light creams and pastels. In short, this floor just works with pretty much every interior.

Discover Supremo Royal Sand Silic, a quality luxury Vinyl flooring with a natural stylish look. It has been manufactured using highest quality recycled polymers. The grain and overall look of the plank is designed to replicate the look of natural wood.

The edges of the planks are micro bevelled, which contributes to the authentic look of natural wood these floorboards possess, while the fitting method is click system.

We strongly recommend to order a sample and not rely only on the photos on the web.

Due to the nature of the products, description and images should only be used for guidance.

We recommend fitting this product with our specific Underlay Supremo Vinyl 1.5mm

Unless the product has pre applied underlay already, in this case do not use any type of underlay but the pre applied underlay.

It needs to be installed on top of a 100% straight, rigid and even subfloor (We highly recommend to use self leveling compound to reach high enough degree of evenness).

When installing on top of screed the screed moisture must not exceed 2%.

Installation Highlight If the sub floor is made of wood floor boards a minimum 18mm plywood should be applied and secured before fitting the LVT

We strongly recommend that Vinyl flooring tiles must be installed only on dry screed subfloor and only by a professional fitter

Installing this product on top of an uneven subfloor or unsuitable underlay will cause the click system to fail and the floor to get damaged over time.

You have to create an expansion gap or barrier every 30m2 when fitting LVT.